Spectrums
TopLight™ Series
GROW3™ TopLight™ Series are innovative fixtures that are the closest light you will get to replicating sunlight’s dynamic qualities. Designed for high mounted applications, and available in 120W to 320W power.
The possibilities are endless with color ratio control. The TopLight™ Series are designed for scientific or commercial applications where precision is required. These modern LED fixture is designed and built in Canada. Find the one that's right for you!
With color ratio technology offering spectra beyond the standard PAR range, the grower can adjust to use it in the greenhouse on any installation height. You also can tailor the spectra to their plant’s growth phase (propagation, vegetative, flowering, or finishing).
The TopLight™ HC model is designed as a direct LED replacement for 1000W HPS lamps. Suitable for applications from 4-foot to 14-foot installations.
This model is designed with the same color profile as a high pressure sodium lamp. However, it is fully adjustable with the SmarTune™ technology. Full control of the color ratio and intensity, through the SmarTune™ technology. The HC model is designed for best operation between 1:1 to 10:1 ratios.
Saves up to 60% energy, or more, when used with LYNX3™ and SmarTune™ controls.
HC Model
789
PPF µmol/s
2.42
µmol/J
320
Watts
The TopLight™ HC model is designed as a direct LED replacement for 1000W HPS lamps. Suitable for applications from 4-foot to 14-foot installations.
This model is designed with the same color profile as a high pressure sodium lamp. However, it is fully adjustable with the SmarTune™ technology. Full control of the color ratio and intensity, through the SmarTune™ technology. The HC model is designed for best operation between 1:1 to 10:1 ratios.
Saves up to 60% energy, or more, when used with LYNX3™ and SmarTune™ controls.
RE Model
1073
PPF µmol/s
3.1
µmol/J
320
Watts
HS Model
The TopLight™ HS model is designed as an replacement for HPS lights. For the growers that are looking to use the consistent light profile that they are familiar with in an HPS light. The HS model has two sizes and three intensities. Available in 24"-120W, or 48"-230W or 300W. Choose the size and maximum intensity that suits your growing environment best. The HS model is most efficient between 2:1 to 10:1 ratios.
Save more energy when used with LYNX3™ and SmarTune™ controls.
The TopLight™ HP PRO model is designed as an replacement for HPS lights with added UV and far red nanometer ranges. For the growers that are looking to use the consistent light profile that they are familiar with in an HPS light with added benefits of ePAR. Available in 48"-250W or 320W. Choose the size and maximum intensity that suits your growing environment best. The HP model is most efficient between 2:1 to 10:1 ratios.
Save more energy when used with LYNX3™ and SmarTune™ controls.
HP Model
740
PPF µmol/s
2.53
µmol/J
320
Watts
The TopLight™ WW model is designed as a full spectrum all white solution. Without the hassles of calculating the amount of red or blue, the full spectrum white LEDs contributes enough of the red and the blue spectrum, for the grower that wishes only to adjust intensity. This is the most simple type to operate. The full spectrum white also still has small contributions of green and yellow to break through the canopy and reach the lower leaves and fruits.
Save more energy when used with LYNX3™ and SmarTune™ controls.
WW Model
729
PPF µmol/s
2.44
µmol/J
300
Watts
The TopLight™ MH model is designed to mimic traditional Metal Halide lamps. Red:Blue ratios as low as 0.68:1 with options for color ratio adjustment up to 3:1.
Save more energy when used with LYNX3™ and SmarTune™ controls.
MH Model
709
PPF µmol/s
2.59
µmol/J
300
Watts
The TopLight™ MH model is designed to mimic traditional Metal Halide lamps, with the added benefit with UVA and far red (380nm-780nm). Red:Blue ratios as low as 0.68:1 with options for color ratio adjustment up to 3:1.
Save more energy when used with LYNX3™ and SmarTune™ controls.
MP Model
709
PPF µmol/s
2.59
µmol/J
320
Watts
The TopLight™ SS model is designed for easy use. The SS series, as with all GROW3 lights, boasts an adjustable color ratio control (0.63:1 to 10:1), integrated wireless mesh networking, and energy efficiency
with high-precision drivers.
Save even more energy with wireless controls through the SmarTune™ app, factoring DLI and light feature controls. Upgrade your indoor space with our innovative grow light.
Saves up to 60% energy, or more, when used with LYNX3™ and SmarTune™ controls.
SS Model
753
PPF µmol/s
2.6
µmol/J
300
Watts
